|
उत्पाद विवरण:
|
| प्लास्टिक मोडलिंग प्रकार: | फूंक मार कर की जाने वाली मोल्डिंग | सामग्री: | पीपी |
|---|---|---|---|
| तापमान प्रतिरोध: | 130 ~ 150 ℃ | बाद में आसंजन दर: | ≥ 85% |
| कठोरता: | कोमल | संसाधन विधि: | सह-बहिष्करण प्रवाह विस्तार |
| पारदर्शिता: | पारदर्शी | मोटाई सीमा: | 0.04-0.12 मिमी |
| चौड़ाई सीमा: | 20-1200 मिमी | आस्तीन का व्यास: | 76 मिमी / 152 मिमी |
| Md तन्य शक्ति: | ≥300 एमपीए | एमडी बढ़ाव@ब्रेक: | ≤50% |
| छीलने का बल: | 4-8; 10 ~ 15; 20 ~ 30 gf/25 मिमी | रोल आकार: | 100*55*55 सेमी |
| मासिक क्षमता: | 550टी | ||
| प्रमुखता देना: | Printable MOPP Release Film,Portable Packaging MOPP Film,Soft Properties MOPP Film |
||
Material: PP Type: Release Film
Application: Used as release materials for butyl tapes, acrylic tapes and foam tapes.
MOPP release film is a commonly used release material, widely used in adhesive tapes and self-adhesive products. It is made by single-sided or double-sided silicone oil coating based on the MOPP substrate. MOPP represents a Monoaxially Oriented Polypropylene Film, made by stretching the polypropylene film in a longitudinal and unidirectional direction, which provides high tensile strength, good mechanical properties and heat resistance.
| S.N. | Item | Unit | Performance Index |
|---|---|---|---|
| 1 | Appearance | / | Smooth film surface, No bubbles, no wrinkles, or no layering |
| 2 | Thickness | mm | 0.06-0.10 |
| 3 | Width | mm | 20-1200 |
| 4 | MD Tensile Strength | Mpa | ≥300 |
| 5 | MD Elongation@Break | % | ≤50 |
| 6 | Peeling Force | gf/25mm | 4-8;10~15;20~30 |
| 7 | Subsequent Adhesion Rate | % | ≥85 |
व्यक्ति से संपर्क करें: Mr. Aaron.Zhang
दूरभाष: 0086-15901747869
